Service providers trying to take advantage of new, less disruptive trenching

methods for their FTTH deployments may encounter resistance from

municipal authorities who are unfamiliar with these methods. Here are the

answers to any questions municipalities may raise about micro-trenching.

It’s tough being a municipal manager. Managing roads, sidewalks, bridges, water lines, sewers, power lines, gas lines and buildings faithfully and regulating companies championing every new-fangled technology – all under the banner of economic development – is a demanding job. Managers are pushed and prodded in all directions trying to protect residents’ needs today while enabling economic development to serve their interests into the future. No wonder they approach new methods with caution. Managing the exponential growth of fiber optic networks is one such daunting challenge facing municipalities all over the world. One creative solution that has emerged to dramatically lower the cost of first-mile fiber networks is micro-trenching.

Micro-trenching is a low-impact deployment methodology in which fiber and conduit are inserted into a slot-cut trench less than 3/4 inch wide and between 9 and 12 inches deep – without damaging or disrupting existing infrastructure. In fact, when the trench is properly reinstated and backfilled with a cold asphalt material, it is difficult for the casual observer to see it. The cost savings, speed of deployment and reduction in resources over conventional trenching are compelling.

The new MOBOTIX NPA set has been released.� This new unit provides full IEE 802.3af power to the camera port, meaning it can be used on any PoE compatible device, not just MOBOTIX cameras.� The new NPA can also take an input directly from a 12-42VDC battery, making it perfect for powering cameras in many applications, such as on vehicles.� The new NPA will continue to power all x12 and x22 series cameras (but will not power x10 or x1 series cameras).

What’s the right lease for you?

Does your company have a point of view on leasing versus the outright purchase of capital equipment?

Have you considered how redundant technology might compromise the integrity of your current security system?

Does the affordability of certain security system technology influence the type of security solution you end up with?

SSE Installations recognises that many organisations struggle with these and other questions when it comes to choosing the right security solution. That’s why SSE Installations provides its customers not only with the appropriate security solution but also with a range of options that address the cost of that solution. For example, we can offer the option of taking out an operating lease with SSE Installations to reduce the capital expense involved with your company’s security needs.

Leasing programs can be tailored to your individual needs and include Comprehensive Maintenance which provides equipment warranty over the life of the agreement. This leaves you with ongoing support to assist you in the operation of your security system, for the life of your system. And because SSE Installations specialise in electronic security systems, our customers will always have access to the most advanced equipment on the market.

Frequently Asked Questions 

Q. Why should I lease?

A. Keep Debt off the Balance Sheet.

Generally accepted accounting principals allow lessees to acquire assets without the accompanying debt appearing on their balance sheet.

• Minimal down payment required.

Most traditional financing options require a sizeable down payment. SSE Installations has reduced the price of electronic security dramatically by replacing high, up front purchase costs with a minimal down payment amount followed by low monthly payments. Leases can also include “Low” costs like installation and maintenance packages.

When equipment is purchased with borrowed funds, credit lines with lenders are reduced. When equipment is leased, businesses have, in fact, established additional lines of credit with the lessor.

• Improve your profitability and liquidity.

When a company purchases equipment, it must capitalise the equipment on its balance sheet by showing it as an asset, along with a corresponding liability for any loans used to finance the equipment’s purchase. This alters various financial ratios e.g. Debt/Equity. However, if a lease is classified as an operating lease for the lessee’s financial reporting purposes, it is not required to be capitalised in the financial statements.  Furthermore, the only expense appearing on the lessee’s income statement attributable to the lease would be the full lease amount of the payment.

Q. What should I do if I have problems with the equipment that I lease?

A. SSE Installations is solely responsible for service or warranty issues and we will support your equipment over the term of the lease. Leasing agreements come with Comprehensive Maintenance for the duration of your contract.

Q. What is Comprehensive Maintenance?

A. As part of your leasing agreement, you will receive added value with the inclusion of Comprehensive Maintenance on all system repairs (including parts and labour) for the duration of your contract. Some conditions apply, please ask your SSE Installations Consultant for further detail on these conditions and how a Service and Maintenance plan can minimise the risk to your property and assets.

Q. What happens at the end of my operating lease agreement?

A. At the end of the term you have the flexibility to:

Refurbish the existing equipment with new equipment under a new agreement, Continue with the operating lease, Offer to buy the equipment at “market value”.  

Q. Can I cancel the agreement?

A. An operating lease is a fixed term contract, if you cancel, you must pay out the balance of the agreement.

Contact SSE Installations on 02 8001 6654 and we will look after you leasing needs

In the past, some external detectors have either been very difficult to set up, or poor performance has been blamed on bad installation. Usually, the two factors have some bearing on each other. If a detector is difficult to set up then the chances are that a few will be installed incorrectly.

The detectors were installed in a large yard, All of the systems were tested simultaneously, and all were mounted as per the manufacturers specifications. cable runs were of a similar lengh.

     PRODUCT                                   OVERALL RATING

Optex HX40                                    8/10

Takex MS12FE                             8.2/10

Texecom prestige External TD     8.5/10

Risco Group WatchOut Dt       8/10

All testing done by Benchmark magazine

To ensure your security products are working to their optimum performance, SSE can provide you with a Quality Maintenance Plan to suit your specific needs.

Inspection

Check whether staffs have experienced any problems with there CCTV system.

Carry out a visual inspection of all major components for signs of deterioration or damage and rectify as necessary.

Cameras

Examine supporting brackets and towers for signs of corrosion and damage.

Check physical condition of cameras and housings for signs of deterioration due to rain, dust and dirt.

Check that field of view is correct.

Check that all camera bracket fittings and clamping bolts are tight.

Check that lenses are correctly focused.

Check operation of auto-iris lenses as appropriate.

Clean housing windows as necessary and clean if needed.

Check that washer bottles are full, refilling if necessary.

Check operation, blade condition and parking position of wiper unit, adjusting stop position if necessary.

Check condition of pan / tilt unit, adjusting position of end stops and presets where applicable.

Check operation of infrared units.

Monitors

Check physical condition and cable connections.

Check operation of controls and adjust for best picture.

Controls

Check physical condition and cable connections.

Check operation of multiplex and switchers controllers

Check time / date settings and adjust if necessary.

Check operation of telemetry controllers.

Video / Digital Controllers

Check hours run indicator and recommend for removal for service as appropriate.

Check all condition as necessary.

Check operation controls and make short test recording.

Check time / date settings and adjust if necessary

Check that memory setting is correct and time-lapse is working

Before leaving

Provide answers to any questions or queries that the client may have about there system.

Complete maintenance report and discuss work with client

The choice between IP-enabled and composite systems is not a simple one to make. After all, does it really matter hoe the video is transmitted, or indeed is it vital that all data in one solution is transmitted in the same way? Of course it does not: att that really matters is the quality of the final image, and its ability to be used in the way that the end user requires.

The video server is one element of a CCTV system, and has a simple job to do. It encodes compostive video so that it can be transmitted, veiwed and managed via a network.

All of the systems were tested simultaneously, and all were mounted as per the manufacturers specifications. cable runs were of a similar lengh.

     PRODUCT                                   OVERALL RATING

Axis 241S                       8.5/10

Bosch VIPX1                             8.37/10

CBC ZN-T9000                                8.25/10

Dallmeier Microstreamer       7.87/10

Dedicated Micros DV-IP            8.12/10

Synectics E-100                             8.75/10

All testing done by Benchmark magazine

SSE Installation are now certified Geutebruck installers, we are fully trained in the GeViScope / Reporter product.

If you have any questions or needs on this product please contact Peter Kneitel.

We are fully trained in a large range of other CCTV equipment such as:

• DVTeL (Hybrid IP)
• Pacom DVR
• NEO Series DVR
• NVR Pro Series (Hybrid IP)
• NUUO DVR
• ExacqVision Pro (Hybrid IP)

Opportunistic thieves consider office buildings as easy targets. Even a workmate could be a potential thief. Here are 10 ways you can increase workplace security:

1. Lock it up or lose it. Thieves usually look for items of value such as laptop computers, mobile phones and electronic equipment they can easily sell. Staff property, such as wallets and valuables, will also be stolen if not locked up.
2. Make sure you have up-to-date security. Office security needs constant attention. Thieves will always be looking for opportunities. If your building has up-to-date security measures in place and alert staff, it may deter or prevent a theft.
3. Check security procedures for all building entry and exit points. Check for any faults and weaknesses in the security procedures you use. Thieves will take advantage of any opportunities to gain undetected access, such as through faulty fire doors and elevators; unattended loading docks and unattended reception areas.
4. Encourage staff to approach unknown visitors. Thieves often gain entry to buildings by ‘tailgating’ a legitimate staff member. Security and other relevant staff should question people who are not wearing identification and establish if they have authority for being on the premises. A security process should be in place to deal with this sort of situation.
5. Establish an assets register. Make sure your assets register contains the make, model and serial numbers of all your office equipment and is kept in a secure area.
6. Nominate a security coordinator. It is recommended that one person in each office be nominated to be responsible for security issues. Their role should include: Regularly conducting a security audit of the office; raising security concerns at staff meetings; liaising with other tenants or offices in the building; making recommendations to improve security, and liaising with building security.
7. Install security system warning signs to deter thieves. Warning signs at entry points to the building can inform a potential thief of your security systems and deter them from entering the building. (For example, if you use 24 hour video surveillance, put up a sign advertising the fact.)
8. Network with other tenants about security issues. To have a broader understanding of the security issues that affect your office it is important that you liaise with building management and other tenants. This can be mutually advantageous.
9. Report all suspicious or criminal activity to police. If you hear something or see something, say something. It is important that all thefts are reported to police, even if there is no apparent evidence left at the scene and further investigation may not required. Suspicious activity outside or within the building should also be reported to police. For general reporting, call 131 444. However, if staff believe that they are in danger of being injured or a crime is in progress they should call 000 for emergency assistance.
10. Ensure all staff take personal security precautions in the workplace, including:
    • never leave your purse or wallet in plain view or in the pocket of a jacket hanging on a door
    • don’t leave cash or valuables at the office
    • if you work alone or before/after normal business hours, keep the office door locked
    • if you work late, try to find another worker or a security guard to walk out with you
    • if you are in the elevator with another person, stand near the control panel. If someone gets on that makes you feel uncomfortable, get off immediately and wait for another elevator
    • report all suspicious persons/circumstances to the proper authorities: office manager, building security and/or the police
    • be aware of all escape routes for emergencies and have police, business and emergency numbers displayed prominantly.

From the Australian Fedural Police Web  site http://www.afp.gov.au/act/businesses/workplace_security.html

 All of the tests on the static dome cameras were carried out simultaneously, and all used the same cable lenghts and monitors. because the base specification for the test was colour static dome cameras, all devices regardless of switching capabitities - were tested in an internal environment, and tests were carried out in colour mode only. The tests were conducted using both test charts for colour and grey-scale accuracy, and real-world motion-heavy scenes to access the impact of diverse image content.

     PRODUCT                                   OVERALL RATING

CBC Ganz VC-D5212PHA                          7.75/10

Genie CCTV AVRCD-5351                          8/10

Panasonic WV-CF324E                          8/10

Samsung SID460P                               8.5/10

All testing done by Benchmark magazine

THINGS YOU SHOULD KNOW

The NSW Police Force CCTV Register (’the Register’) is a database which has been established to record the location of CCTV installations across NSW.

Information stored in the Register has been collected and will be used for operational policing purposes. We will not provide this information to a third party and we will secure this information from unauthorised access.

Your consent to supply this information to us for inclusion in the CCTV Register DOES NOT mean that you consent to supply us imagery captured by, or stored on, your CCTV system/s (eg. video footage or still images).

There is no obligation for you to provide information. Registration is purely voluntary.

Every effort will be made to ensure that information stored in the Register is accurate. To assist us, please notify us if any of the information you have provided changes. We may contact you from time to time to verify the information you have provided to us.

If you wish to have your details removed from the Register, please advise us in writing.

·                 Click here to Register your business CCTV details on-line

·                 Click here to Download a CCTV Register Form (PDF, 880KB)

·                 Click here to Download a CCTV Register Brochure (PDF, 429KB)

From NSW Police